Put in the card to remove the pre-installed partition, then add two new partitions. For additional data storage, roughly 30 GB, and for additional swap 768 MB. For best results first read the whole set of commands, try to understand, what is going on, ask any question as necessary. You need the package rootsh installed on the N900 for the following commands to work fine Code: sudo gainroot fdisk /dev/mmcblk1 Fdisk program is menu-based. Use 'h' for help to get the list of commands inside fdisk. In fdisk do Code: d 1 n p 1 1 29764 n p 2 29765 30532 w You created two partitions, the first for additional file storage the second for the second swap partitions. Now apply the file systems Code: mkfs.vfat -n sdcard1 /dev/mmcblk1p1 mkswap -L swap_sdcard /dev/mmcblk1p2 After a reboot you might use one of the different methods to utilize the second swap like ereswap, swappolube or else. Good luck!
sudo gainroot fdisk /dev/mmcblk1
d 1 n p 1 1 29764 n p 2 29765 30532 w
mkfs.vfat -n sdcard1 /dev/mmcblk1p1 mkswap -L swap_sdcard /dev/mmcblk1p2