View Single Post
Posts: 669 | Thanked: 433 times | Joined on May 2010
#1
I am trying to restore a backup made with backupmenu 1.20 from one device I have to a 2nd one.

I use optfs formatted to 4gb (on both) and the following:

Community SSU version = 2011.38-1Tmaemo9.1+thumb1
Kernel Power Version = 2.6.28.10-power53

After I failed to make it work with simple restore of rootfs and opts from the first device (I got a blank screen with white light on left down side and after few seconds the device turns off), I tried the following procedure:

start with usb connected and "u" pressed
restore image "RX-51_2009SE_20.2010.36-2.003_PR_COMBINED_003_ARM.bin" and when it starts to boot -> power off
start with usb connected and "u" pressed
restore "flashable_rootfs_v0.56-1-20101109.img" image and reboot to backupmenu 0.56
restore an image with backupmenu 1.20 and reboot into it again

With version 1.20, restore both the root and optfs images (restore went successfully) -> reboot.

After reboot, the white light on the left down side turns and stays on, and the screen lights on blanked for a few seconds and then the device turns off (same behavior as in my first restore).

I also tried with an older backed up image (2 months old) - same process and all happens the same.

i used to do this procedure in the past (last time was about 6 months ago) with no issues.

Any idea what might be the cause for this and how I can make it work with my restored image? Is there another way to backup & restore between the devices?
 

The Following User Says Thank You to impeham For This Useful Post: