maemo.org - Talk - View Single Post - The screen doesn't turn on, help me figure out how to access internal memory

elementaru	2016-08-22 , 12:11
Posts: 5 \| Thanked: 6 times \| Joined on Aug 2016	#5

Originally Posted by sicelo

tv out is known to not work when screen can't display

i would actually suggest rescueOS as the best alternative

when you plugin pc, there is normally a dialog roughly in the middle of the lower half of the screen ... so you can touch in that general area and hope USB mounts. Mass storage is above PC Suite Mode

You may also want to try rescueOS .. which

Thanks, trying it now, however having some problems. I follow the instructions from here, and it says

Code:

For maemo_flasher, it's:

  flasher-3.5 -k rescueOS_n900_kernel_1.2.zImage -n rescueOS-1.2.img -l -b"rootdelay root=/dev/ram0"

So in my case I enter this:

Code:

jusno@juac47:~$ flasher-3.5 -k "/home/jusno/Downloads/rescueOS_n900_kernel_1.2.zImage" -n "/home/jusno/Downloads/rescueOS-1.2.img" -l -b"rootdelay root=/dev/ram0"

I see this:

Code:

flasher v2.5.2 (Oct 21 2009)

Suitable USB device not found, waiting.
USB device found found at bus 002, device address 007.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2_PR_MR0
Sending kernel image (1823 kB)...
100% (1823 of 1823 kB, avg. 28488 kB/s)
Sending initfs image (5260 kB)...
100% (5260 of 5260 kB, avg. 28279 kB/s)
Using kernel command line: "rootdelay root=/dev/ram0"

and that's it. I just get back to my terminal. If I understand correctly a console should boot up, where I would be able to see the said /rescueOS/ dir, run scripts etc, but I see nothing. Am I missing something here?

Quote & Reply |

The Following User Says Thank You to elementaru For This Useful Post:
juiceme