Active Topics
-
Porting apps to Leste (29)
to Maemo 7 / Leste by Arno_11 - 2 days, 6 hrs ago -
Install Fonts in N900 (68)
to Maemo 5 / Fremantle by teroyk - 3 days, 10 hrs ago - more...
|
2011-12-07
, 16:06
|
|
Posts: 298 |
Thanked: 197 times |
Joined on Dec 2009
@ Norway
|
#2442
|
Ok... Now I don't like the changes. SR doesn't crash, but I can't play videos because of a DSP MMU fault... -.-
I was so sure that I read "stable" in the title.
How am I supposed to deal with this..?
Last edited by Nokia 5700; 2011-12-07 at 16:08.
I was so sure that I read "stable" in the title.
How am I supposed to deal with this..?
Last edited by Nokia 5700; 2011-12-07 at 16:08.
|
|
2011-12-07
, 16:14
|
|
Posts: 468 |
Thanked: 610 times |
Joined on Jun 2006
|
#2443
|
sadly I also experience a number of reboots with kp49. First I thought is was because I selected the DSP profile, and that it was a overclocking problem. But after using default settings a few days now, that doesn't seem to fix the problem. I will be doing some more tests in the near future hoping I can pinpoint a problem. I disabled SR btw.
|
|
2011-12-07
, 16:38
|
|
Posts: 1,523 |
Thanked: 1,997 times |
Joined on Jul 2011
@ not your mom's FOSS basement
|
#2444
|
Originally Posted by Nokia 5700
/me too... *scratches head*
Ok... Now I don't like the changes. SR doesn't crash, but I can't play videos because of a DSP MMU fault... -.-
I was so sure that I read "stable" in the title.
How am I supposed to deal with this..?
| The Following User Says Thank You to don_falcone For This Useful Post: | ||
|
|
2011-12-07
, 16:51
|
|
Posts: 638 |
Thanked: 1,692 times |
Joined on Aug 2009
|
#2445
|
I repeated all the tests made with the "default" profile also with the "dsp" profile BUT setting VDD1=0.
Everythink works without any issue! No DSP FAULTS, no battery drain, nice play and record @ 720p, no reboots also after 20 minutes of intensive make!
Last edited by xes; 2011-12-07 at 16:55.
Everythink works without any issue! No DSP FAULTS, no battery drain, nice play and record @ 720p, no reboots also after 20 minutes of intensive make!
Originally Posted by xes
@freemangordon
Wishing this could help...This is the situation:
--------------------------------------------------------------------------
WORKING: default profile BUT with vdd1=0
kernel-config show
current kernel configuration:
current frequency: 600
supported frequencies: 125 250 500 550 600 720 805 850 900 950 1000 1100 1150
min. frequency: 250
max. frequency: 600
avoid frequencies: 125
active frequencies: 250:38,180 500:48,360 550:54,400 600:60,430 720:60,430 805:60,430 850:60,500 900:60,500 950:60,500 1000:60,500 1100:72,520 1150:72,520
SmartReflex VDD1=0, VDD2=1
governor ondemand: ignore nice load= 0, up threshold= 95, sampling rate= 300000, powersave bias= 0
cat /sys/power/efuse_vdd1
0089bda9
009ad4e0
00aadf91
00aac885
00abb5f7
00ab99d8
00ab89c5
00ab80ba
00bbefaf
--------------------------------------------------------------------------
NOT WORKING
(DSP faults every boot and every video, battery drain)
standard default profile with vdd1=1
kernel-config show
current kernel configuration:
current frequency: 500
supported frequencies: 125 250 500 550 600 720 805 850 900 950 1000 1100 1150
min. frequency: 250
max. frequency: 600
avoid frequencies: 125
active frequencies: 250:24,180 500:34,360 550:54,400 600:60,430 720:60,430 805:50,430 850:60,500 900:60,500 950:60,500 1000:60,500 1100:72,520 1150:72,520
SmartReflex VDD1=1, VDD2=1
governor ondemand: ignore nice load= 0, up threshold= 95, sampling rate= 300000, powersave bias= 0
cat /sys/power/efuse_vdd1
0089bda9
009ad4e0
00aadf91
00aac885
00abb5f7
00ab99d8
00ab89c5
00ab80ba
00bbefaf
---------------------------------------------------------------------------
P.S.
the hardware version is 2204.
Last edited by xes; 2011-12-07 at 16:55.
|
|
2011-12-07
, 17:17
|
|
Posts: 104 |
Thanked: 43 times |
Joined on Jan 2010
@ St. Paul, MN
|
#2446
|
After a week of testing KP49 is completely stable for me, with default, dsp and ideal modes.
The one thing I notice is that even without overclocking, using the media player drains the battery much faster than the stock nokia kernel. Basic use, 25 min of music in the car and on stock today I'm at 92% left (running for 3.5 hours so far). The best I've been at with the same use with KP49 was 75% over the past week using battery graph. I'm running CSSU, 1.3...no fancy patches or crap....just figured I'd share. I didn't personalize any of the KP settings, just ran them as-is.
Other than that battery life with any other task seems on par or better than stock nokia kernel on my device.
The one thing I notice is that even without overclocking, using the media player drains the battery much faster than the stock nokia kernel. Basic use, 25 min of music in the car and on stock today I'm at 92% left (running for 3.5 hours so far). The best I've been at with the same use with KP49 was 75% over the past week using battery graph. I'm running CSSU, 1.3...no fancy patches or crap....just figured I'd share. I didn't personalize any of the KP settings, just ran them as-is.
Other than that battery life with any other task seems on par or better than stock nokia kernel on my device.
 |
|
2011-12-07
, 23:02
|
|
Posts: 5,028 |
Thanked: 8,613 times |
Joined on Mar 2011
|
#2447
|
Originally Posted by Nokia 5700
Ok... Now I don't like the changes. SR doesn't crash, but I can't play videos because of a DSP MMU fault... -.-
I was so sure that I read "stable" in the title.
How am I supposed to deal with this..?
Originally Posted by don-falcone
Because it is stable in extras-devel, so usual -devel warnings still apply Me too *scratches head*
Seriously though, freemangordon is working on better re-calculation of SR values - properly testing was"mt possible without plentora of users from -devel installing this, as it turned out.
For now, pushing DSP 600 mhz to MPU 850 (and using lower values for lower MPU) should do. If someone don't like messing with clock/voltage settings, turning vdd1 and vdd2 to 0 with dsp profile should be 100% rock solid stable (sacrificing benefits of SR).
/Estel
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
| The Following User Says Thank You to Estel For This Useful Post: | ||
 |
|
2011-12-08
, 10:26
|
|
Posts: 1,237 |
Thanked: 1,278 times |
Joined on Aug 2011
@ Balochistan
|
#2448
|
moving back to Nokia default kernel. Kernel Power 49 is eating lots of battery. drains my battery completely in 8 hours. in offline mode and in standby. is there is any way to solve it ?
|
|
2011-12-08
, 21:11
|
|
Posts: 100 |
Thanked: 37 times |
Joined on Feb 2010
|
#2449
|
Originally Posted by majaczek
After more than two months, that glitch still occurs when my PC starts to use the internet connection such as when loading a website. Usually it happens every few days, sometimes every day. I don't want to switch back to a dial-up connection. I have the latest kp49. Using the default 600 MHz kernel profile has no effect so it's not a profile causing it. I wonder is there anything to do about the glitch.
recently (about a week ago) i updated KP49 beta to KP49 from extras devel. it seems to work stable, but i noticed i still have bugs related to usb networking, which may lead to reboot.
...
- I managed to usb networking (where PC is router and PC and N900 are linked by usb cable) be able to run on stock kernel, and it occured that USB-networking-bug happenned at least once (it was the bug not plain incompability since i was able to transfer some data)
- the one above suggests it's a bug in driver, so it's not mainly related to the kernel power, but it may be a bug in driver firing a bug in KP (we had some once, and i believe it shouldn't crash the system, just break connection)
| The Following User Says Thank You to megaexer For This Useful Post: | ||
|
|
2011-12-09
, 19:51
|
|
Posts: 1,237 |
Thanked: 1,278 times |
Joined on Aug 2011
@ Balochistan
|
#2450
|
flashed my phone yesterday and installed kp49 today. no battery draining issues till yet. will install hd libs and camera ui 2 for hd video recording. will tell if battery draining issue came back.
 |
| Tags |
| battery-status, bq27x00_battery, kernel, kernel-power, misiak4king, noobs-cant-read, pali4president, patches, readdirections, revolverspinyou |
«
Previous Thread
|
Next Thread
»
|
All times are GMT. The time now is 02:56.
Before I passed to KP49 with stock DSP profile, I had KP48 with a rather undervolted profile with some instabilities from time to time. At the time, using compcache was almost impossible, causing lock usually by SD file system corruption (see a pattern here?)
I decided to test KP49 some time ago and so far, very good, with very stable phone and seeminlgy almost same battery life of my old configuration.
Then I decided to enable compcache again, installed the swap enabler script and felt immediately that probably no more fiddling would be done since the 900 was almost perfect.
Unfortunately, since then those two hard crashes happened, both as described with a very similar pattern. If somebody gives me a clue, I can try to dig it more if it happens again.