Active Topics
-
Is there a section to talk about Java ME? Apps, etc. (6)
to General by Kalatti - 44 mins ago -
Full linux distros on Sailfish OS (253)
to SailfishOS by qoh - 2 days, 18 hrs ago - more...
| The Following User Says Thank You to thedead1440 For This Useful Post: | ||
|
2012-10-23
, 08:59
|
|
Posts: 85 |
Thanked: 96 times |
Joined on Apr 2010
@ Dunfermline, Scotland
|
#352
|
Bloody annoying!
__________________
Mobile: [Nokia Lumia 800] [Nokia N9 PR1.3] [Nokia N900 - CSSU 16.8] [Nokia N8 - Nokia Belle]
Static: [Mac OS X 10.8.2] [Win8 64Bit]
Mobile: [Nokia Lumia 800] [Nokia N9 PR1.3] [Nokia N900 - CSSU 16.8] [Nokia N8 - Nokia Belle]
Static: [Mac OS X 10.8.2] [Win8 64Bit]
|
|
2012-10-23
, 12:02
|
|
Moderator |
Posts: 6,215 |
Thanked: 6,400 times |
Joined on Nov 2011
|
#353
|
Originally Posted by philheaton
You shouldn't have done an over-the-air update
Bloody annoying!
The forum here is quite fast when it comes to updates with proper guides so just refer here next time...
|
|
2012-10-31
, 00:10
|
|
Posts: 2 |
Thanked: 0 times |
Joined on Oct 2012
|
#354
|
Hi, I've got a N9 which shows the yellow warning triangle telling me that I have changed the software.
I have now tried re-flashing (on several computers) using this guide but it gives me an error message.
Anyone who can help bring it back to life?
----------------------------------------------------
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Program Files\Nokia\Flasher>flasher.exe -i
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_001
Success
C:\Program Files\Nokia\Flasher>flasher.exe -f -F DFL61_HARMATTAN_40.2012.21-3_PR
_LEGACY_001-OEM1-958_ARM.bin
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 13141 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped
Battery level 93 %, continuing.
image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[_] kernel [writing 37 % 2048 / 2714 kB 1910 kB/s]
[_] rootfs [finishing 100 % 2048 / 1170282 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error
image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3540 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1314 kB/s]
[f] rootfs [finishing 0 % 2048 / 1170282 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmczZnBYu/internal0p2'
mmc: Could not remove mount directory /tmp/sudmmczZnBYu/mnt: No such file or dir
ectory
[Pipe 5] Finishing in error state with status 1
========================================
ERROR: Failed to flash images
C:\Program Files\Nokia\Flasher>
I have now tried re-flashing (on several computers) using this guide but it gives me an error message.
Anyone who can help bring it back to life?
----------------------------------------------------
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Program Files\Nokia\Flasher>flasher.exe -i
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_001
Success
C:\Program Files\Nokia\Flasher>flasher.exe -f -F DFL61_HARMATTAN_40.2012.21-3_PR
_LEGACY_001-OEM1-958_ARM.bin
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 13141 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped
Battery level 93 %, continuing.
image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[_] kernel [writing 37 % 2048 / 2714 kB 1910 kB/s]
[_] rootfs [finishing 100 % 2048 / 1170282 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error
image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3540 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1314 kB/s]
[f] rootfs [finishing 0 % 2048 / 1170282 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmczZnBYu/internal0p2'
mmc: Could not remove mount directory /tmp/sudmmczZnBYu/mnt: No such file or dir
ectory
[Pipe 5] Finishing in error state with status 1
========================================
ERROR: Failed to flash images
C:\Program Files\Nokia\Flasher>
|
|
2012-10-31
, 02:18
|
|
Posts: 164 |
Thanked: 47 times |
Joined on Jun 2012
|
#355
|
Take it easy, don't jump at ones on fllashing the device, but first install the pcsuite software and just insert your phone on one of USB ports and select as syncronising device and let it instal the phone device driwers and after is finish installing pull USB out few sec then put it again on the same USB port but select as Storage driver, and let it install drivers...then prepare your fllashing operation.
I might guess..that your phone allready was fllashed with "zimage" for nitdroid that's why you are getting the warning on screen, weell fllashing it again it will vipe that duo boot...but is up to you...
I see by the product version...you are atempting to update, and local version is 001 as you see on firmware file...don't use higher value than that.
Try this way...to make it easy fllashing your phone, maybe you should make dir in c:/nokia and install fllash in there and import your firmare.bin in that c:/nokia/fllasher and in comand line on dosbox-win enter like this:
c:/nokia/fllasher/fllasher.exe -f -F c:/nokia/fllasher/firmware.harmatan_001.bin and turn your phone OFF.
I did fllash my phone by turning on instead bcz pc could not find my phone few times...so it might happen to your phone to...so try borh ways...but careful do not disconect cable if pc and phone are active and operating fllashing or transfering files!
I might guess..that your phone allready was fllashed with "zimage" for nitdroid that's why you are getting the warning on screen, weell fllashing it again it will vipe that duo boot...but is up to you...
I see by the product version...you are atempting to update, and local version is 001 as you see on firmware file...don't use higher value than that.
Try this way...to make it easy fllashing your phone, maybe you should make dir in c:/nokia and install fllash in there and import your firmare.bin in that c:/nokia/fllasher and in comand line on dosbox-win enter like this:
c:/nokia/fllasher/fllasher.exe -f -F c:/nokia/fllasher/firmware.harmatan_001.bin and turn your phone OFF.
I did fllash my phone by turning on instead bcz pc could not find my phone few times...so it might happen to your phone to...so try borh ways...but careful do not disconect cable if pc and phone are active and operating fllashing or transfering files!
| The Following User Says Thank You to An9 For This Useful Post: | ||
it looks like another of those N9s with dodgy flash memory...
|
|
2012-11-01
, 20:12
|
|
Posts: 2 |
Thanked: 0 times |
Joined on Oct 2012
|
#357
|
Thanks AN9 and THEDEAD1440!
Unfortunately it seems that it is a hardware issue. I have tried and tried but no success.
Is there any possibility to install a kind of "basic" software? I don't really have anything to loose now.
Unfortunately it seems that it is a hardware issue. I have tried and tried but no success.
Is there any possibility to install a kind of "basic" software? I don't really have anything to loose now.
|
|
2012-11-02
, 12:22
|
|
Moderator |
Posts: 6,215 |
Thanked: 6,400 times |
Joined on Nov 2011
|
#358
|
Originally Posted by Pingo
Sadly I'm not aware of much options other than having to take your device in to Nokia Care
Thanks AN9 and THEDEAD1440!
Unfortunately it seems that it is a hardware issue. I have tried and tried but no success.
Is there any possibility to install a kind of "basic" software? I don't really have anything to loose now.
|
|
2012-11-13
, 12:08
|
|
Posts: 11 |
Thanked: 1 time |
Joined on Jul 2012
|
#359
|
Originally Posted by MINKIN2
can you Give me the Image Version
Sorry to bump again guys, but I am still trying to find a compatible firmware for my n9.
I hate to sound whiny, but I do have the warranty issue still pending with my screen fault and ATM I am stumped? I understand that I have to use a higher firmware version but can't find it
Here is the last attempt of flashing... (hopefully an eagle eyed user may spot) something?)
C:\Program Files\Nokia\Flasher>flasher -i
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1601
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_006
Success
C:\Program Files\Nokia\Flasher>flasher -f -F DFL61_HARMATTAN_30.2012.07-1_PR_LEG
ACY_001-OEM1-958_ARM.bin --erase-user-data=secure
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Found device RM-696, hardware revision 1601
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_006
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 20274 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1601
Server implements softupd protocol version 1.8
Battery level 71 %, continuing.
Erasing, this may take a while.
Erase done.
Image SW version DFL61_HARMATTAN_30.2012.07-1_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped
Battery level 71 %, continuing.
image [state progress transfer flash speed]
---------------------------------------------------------------------
[_] cert-sw [init 0 % 0 / 0 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure
image [state progress transfer flash speed]
---------------------------------------------------------------------
[f] cert-sw [init 0 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1329851503)
[Pipe 0] Finishing in error state with status 10
========================================
ERROR: Failed to flash images
C:\Program Files\Nokia\Flasher>
EDIT: Finally, found an image
Battery level 81 %, continuing.
image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3003 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1232 kB/s]
[x] rootfs [finished 100 % 966666 / 966666 kB 10434 kB/s]
Updating SW release
Success
You would not believe how many images I have tried.
i have same Error
|
|
2012-11-13
, 12:10
|
|
Moderator |
Posts: 6,215 |
Thanked: 6,400 times |
Joined on Nov 2011
|
#360
|
Originally Posted by koorosh-n9
Are you sure you have the exact same error? Post the output here along with the colour of your n9, 16/64GB and which region of the world you are from...
can you Give me the Image Version
i have same Error
ROW FW is pr legacy 001 hence it fails as downgrading isn't allowed even within the same fw version (pr1.3)...