Active Topics

 


Reply
Thread Tools
Posts: 8 | Thanked: 0 times | Joined on Sep 2010 @ Bulgaria
#1
i try to install megoo and broke phone

Pls help me!
thanks !
 
Posts: 8 | Thanked: 0 times | Joined on Sep 2010 @ Bulgaria
#2
i don't run in update mode
 
casper27's Avatar
Posts: 844 | Thanked: 521 times | Joined on Jan 2009 @ UK southampton
#3
I cannot personally offer any advice other than ammend your title to include part of your problem.That way you will get more response from the right people.
Looks like its recoverable as your partition tables look correct but have nothing to boot.
Await a more technical mind...
 

The Following User Says Thank You to casper27 For This Useful Post:
atilla's Avatar
Posts: 1,210 | Thanked: 597 times | Joined on Apr 2010 @ hamburg,germany
#4
if n900 newbies wouldn't **** on the 100 warnings such issues wouldn't happen.
why you installed an not finish os if you have no clue what to do if something goes wrong?
didn't you read somewhere that meego is actual useless for non developers?
anyway.
flash your fiasco and your emmc with the actual firmware.
that should help
__________________


Nobody likes us but we dont care....
 

The Following User Says Thank You to atilla For This Useful Post:
Posts: 8 | Thanked: 0 times | Joined on Sep 2010 @ Bulgaria
#5
how to make eMMC
 
Posts: 3,664 | Thanked: 1,530 times | Joined on Sep 2009 @ Hamilton, New Zealand
#6
The kernel panic show up because of the partition is not booting correctly. Assigning it to the partition of your MeeGo and it will be fine.

But just reflash your device then it will fixed the problem. Boot back to Maemo5

One good piece of advise!! If you don't know what you're doing then don't do it. If you a noobie and wanting to try something a pro would then don't do i. Unless you want run into problems.

Last edited by maxximuscool; 2010-09-26 at 21:17.
 
Posts: 8 | Thanked: 0 times | Joined on Sep 2010 @ Bulgaria
#7
i don't run in update mode
 
Posts: 51 | Thanked: 63 times | Joined on May 2010
#8
This will get you back to Maemo5
http://wiki.maemo.org/Updating_the_firmware
 
Posts: 8 | Thanked: 0 times | Joined on Sep 2010 @ Bulgaria
#9
don't work hold "U"
 
mveplus's Avatar
Posts: 66 | Thanked: 77 times | Joined on Jul 2010 @ intheclouds
#10
Even if someone want to help you will not be able to, because you do not give any usefull details...
Хайде сега да обясниш какво става като включиш телефона към PC то, но с детайли??? Каква операциона система ползваш? Какво ти дава в команандния ред като стартираш флашера? Чак след това идва реда на телефона и вкл. към УСБто и т.н.
Знам че си под пара ама ако искаш да не го дочупиш по добре се успокой и ще стане работата...
Пиши детайли и може да помогна - всъщност нямаше да ти пиша, но добре че видях че пишеш от БГ.
 

The Following User Says Thank You to mveplus For This Useful Post:
Reply


 
Forum Jump


All times are GMT. The time now is 00:10.