Active Topics
-
Install Fonts in N900 (68)
to Maemo 5 / Fremantle by teroyk - 9 hrs, 22 mins ago -
Nokia Booklet 3G (RX-75) Drivers (60)
to Alternatives by Maemish - 5 days, 17 hrs ago - more...
|
2013-07-27
, 23:35
|
|
Posts: 65 |
Thanked: 18 times |
Joined on Mar 2013
@ Serbia
|
#2
|
OmG camera module from N8??
__________________
Beautifully simple
Beautifully simple
|
|
2013-07-28
, 13:26
|
|
Posts: 1,067 |
Thanked: 2,383 times |
Joined on Jan 2012
@ Finland
|
#3
|
Dont use OFC, you can just reflash with the leaked PR1.3 bin file. Although most likely you need to have B2 or newer.
Oh, and in most coutries its illegal to use sim cards with devices beginning with 0044-imei, unless you have special permit from your country operator authority. Usually employees of phone manufacturers are only permitted to use that imei range devices. So even if you manage to get firmware up and running, you will be breaking the law (depending of course the country you are in) if you try to use it on real network.
Last edited by rainisto; 2013-07-28 at 13:35.
Oh, and in most coutries its illegal to use sim cards with devices beginning with 0044-imei, unless you have special permit from your country operator authority. Usually employees of phone manufacturers are only permitted to use that imei range devices. So even if you manage to get firmware up and running, you will be breaking the law (depending of course the country you are in) if you try to use it on real network.
__________________
IRC: jonni@freenode
Sailfish: ¤ Qt5 SailfishTouchExample ¤ Qt5 MultiPointTouchArea Example ¤ ipaddress ¤ stoken ¤ Sailbox (Dropbox client) ¤
Harmattan: ¤ Presence VNC for Harmattan ¤ Live-F1 ¤ BTinput-terminal ¤ BabyLock ¤ BabyLock Trial ¤ QML TextTV ¤
Disclaimer: all my posts in this forum are personal trolling and I never post in any official capacity on behalf of any company.
IRC: jonni@freenode
Sailfish: ¤ Qt5 SailfishTouchExample ¤ Qt5 MultiPointTouchArea Example ¤ ipaddress ¤ stoken ¤ Sailbox (Dropbox client) ¤
Harmattan: ¤ Presence VNC for Harmattan ¤ Live-F1 ¤ BTinput-terminal ¤ BabyLock ¤ BabyLock Trial ¤ QML TextTV ¤
Disclaimer: all my posts in this forum are personal trolling and I never post in any official capacity on behalf of any company.
Last edited by rainisto; 2013-07-28 at 13:35.
 |
|
2013-07-28
, 13:43
|
|
Posts: 59 |
Thanked: 314 times |
Joined on Jul 2013
@ Russian Federation
|
#4
|
Yep, thx for solution, but already trying to do it this morning, here is the result (.bin 791 MB (829*722*074 Bytes) CRC32: 91DF3A6D):
Till now only first OCF (Win_OCF_22-6_EMMC_RM680-OEM1-916) boot unit to Nokia logo, but as I already said, after few seconds it reboots and starts all over again (boot to Nokia logo).
UpDate: Thx, I knew it. I don't planned to use this Proto as retail smartphone. I got it just for my Nokia NFR collection/maximum to try use it as MeeGo OS DevKit.
But looking above chances to reflash it not really big. :/
Last edited by DirkDagger; 2013-07-28 at 14:00.
C:\Windows\flasher -F C:\Windows\DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_RM680-OEM1-916_ARM.bin -f
Microsoft Windows XP [Version 5.1.2600]
(С) Microsoft Corporation, 1985-2001.
C:\WINDOWS>C:\Windows\flasher -F C:\Windows\DFL61_HARMATTAN_40.2012.21-3_PR_LEGA
CY_RM680-OEM1-916_ARM.bin -f
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-680, hardware revision 0521
NOLO version 2.0.21
Version of 'sw-release': DFL61_HARMATTAN_0.2011.11-5_RD_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 18196 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-680 rev. 0521
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_RM680
Image cert-sw not present for this HW (RM-680 rev. 0521)
Image xloader not present for this HW (RM-680 rev. 0521)
Image secondary not present for this HW (RM-680 rev. 0521)
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped
Battery level 95 %, continuing.
image [state progress transfer flash speed]
---------------------------------------------------------------------
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
ERROR: SU_BEGIN_IMAGE_UPDATE_REQ terminated with error code 10: Security failure
Fetching error list:
========================================
bb5_esn_init failed
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
Devicelock ON: cannot flash unsigned image
========================================
ERROR: Failed to flash images
C:\WINDOWS>
UpDate: Thx, I knew it. I don't planned to use this Proto as retail smartphone. I got it just for my Nokia NFR collection/maximum to try use it as MeeGo OS DevKit.
But looking above chances to reflash it not really big. :/
Last edited by DirkDagger; 2013-07-28 at 14:00.
| The Following User Says Thank You to DirkDagger For This Useful Post: | ||
|
|
2013-07-28
, 15:19
|
|
Posts: 1,067 |
Thanked: 2,383 times |
Joined on Jan 2012
@ Finland
|
#5
|
you seems to have device lock on, you can ofcourse just exract the bin from OFC that was flashable, and then flash that bin and append --erase-user-data=secure to wipe the device lockcode.
But it might also be that B1.1 hw is not supported by any recent firmware, in that case you just have a non functioning collector item.
Last edited by rainisto; 2013-07-28 at 15:25.
But it might also be that B1.1 hw is not supported by any recent firmware, in that case you just have a non functioning collector item.
__________________
IRC: jonni@freenode
Sailfish: ¤ Qt5 SailfishTouchExample ¤ Qt5 MultiPointTouchArea Example ¤ ipaddress ¤ stoken ¤ Sailbox (Dropbox client) ¤
Harmattan: ¤ Presence VNC for Harmattan ¤ Live-F1 ¤ BTinput-terminal ¤ BabyLock ¤ BabyLock Trial ¤ QML TextTV ¤
Disclaimer: all my posts in this forum are personal trolling and I never post in any official capacity on behalf of any company.
IRC: jonni@freenode
Sailfish: ¤ Qt5 SailfishTouchExample ¤ Qt5 MultiPointTouchArea Example ¤ ipaddress ¤ stoken ¤ Sailbox (Dropbox client) ¤
Harmattan: ¤ Presence VNC for Harmattan ¤ Live-F1 ¤ BTinput-terminal ¤ BabyLock ¤ BabyLock Trial ¤ QML TextTV ¤
Disclaimer: all my posts in this forum are personal trolling and I never post in any official capacity on behalf of any company.
Last edited by rainisto; 2013-07-28 at 15:25.
| The Following User Says Thank You to rainisto For This Useful Post: | ||
|
|
2013-07-28
, 17:12
|
|
Posts: 646 |
Thanked: 1,124 times |
Joined on Jul 2010
@ Espoo, Finland
|
#6
|
The device seems to have h/w revision 0521.
It should be possible with "flasher -F flashimage.bin -q" to query the contents of the fiasco image and check which h/w revision it supports.
Next step could be to try "--set-hw-revision" option to 'fake' the device revision but... if an image is specifically marked to support only certain hardware, I doubt that it would work with anything older.
It should be possible with "flasher -F flashimage.bin -q" to query the contents of the fiasco image and check which h/w revision it supports.
Next step could be to try "--set-hw-revision" option to 'fake' the device revision but... if an image is specifically marked to support only certain hardware, I doubt that it would work with anything older.
|
|
2013-07-28
, 17:58
|
|
Guest |
Posts: n/a |
Thanked: 0 times |
Joined on
|
#7
|
a few FW OCF flashers available here .
Test thise like minimos suggested, for supported hw revisions.
http://sourceforge.net/projects/n950fws/files/
Test thise like minimos suggested, for supported hw revisions.
http://sourceforge.net/projects/n950fws/files/
|
|
2013-07-29
, 09:24
|
|
Guest |
Posts: n/a |
Thanked: 0 times |
Joined on
|
#8
|
These seem to keep popping up on ebay. Sadly, I dont have that kinda money ....
http://www.ebay.com/itm/Nokia-N950-S...-/261230401221
http://www.ebay.com/itm/Nokia-N950-S...-/261230401221
|
|
2013-07-30
, 23:37
|
|
Posts: 59 |
Thanked: 314 times |
Joined on Jul 2013
@ Russian Federation
|
#9
|
Hi Guys, once again thx for all your replys.
2rainisto, finally I found a way (right order) to erase my B1.1 without errors, here is the log:
I use this stuff to do tactic above:
Win_OCF_22-6_EMMC_RM680-OEM1-916 (RX-71.bin/CRC32: 70762231 + EMMC.bin/CRC32: 891AC7B6)
Win_OCF_02-6_RM680-RM680-OEM1.exe (img.bin/CRC32: A3AD6F6A + emmc.bin/CRC32/9917B32A)
2nieldk, Thx, I found 'em in first day I start reflashing this N950. This FW uploaded by one one the Developer.Nokia Moderators.
But after all this work smartphone don't boot properly. It's flashs ok (blue stripe confirms that both images downloaded to unit), but after booting unit loads to Nokia logo, and starts reboot all over again (this way if R&D Mode OFF).
After I turn R&D mode ON unit shows me that (also loop reboot time by time), so... better than nothing, in any case, it's now clear that the machine is alive and flashable. (Btw, yep, display was little struck in 2 places when I got this unit, but digitizer is fully working.)
So, any more ideas to fix this Zombie?
P.S> 2nieldk, My N950 is same that this item, but has more early HW: http://www.ebay.co.uk/itm/Nokia-N950...-/161071242998
Here is some seller's info he gave:
"This device has HW build 0829, it should be build F1 if I remember correctly. I don't need to mod HW , I can flash PR1.3 directly." So, looks I said right above, and my N950 is most early build (and rare lol) from all N950 protos that exist here and in eBay at the moment.
Last edited by DirkDagger; 2013-07-30 at 23:50.
2rainisto, finally I found a way (right order) to erase my B1.1 without errors, here is the log:
Microsoft Windows XP [Версия 5.1.2600]
(С) Microsoft Corporation, 1985-2001.
C:\Documents and Settings\eskMaemo>flasher -F C:\Windows\RX-71.bin --disable-rd-mod
e
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-680, hardware revision 0521
NOLO version 2.0.21
Version of 'sw-release': DFL61_HARMATTAN_0.2011.11-5_RD_001
Sending ape-algo image (7009 kB)...
100% (7009 of 7009 kB, avg. 17265 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.5.21
Found product RM-680 rev. 0521
Server implements softupd protocol version 1.8
The device is now in production mode
Success
C:\Documents and Settings\eskMaemo>flasher -F C:\Windows\RX-71.bin --erase-user-dat
a=secure
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Ping attempt 1 (250 ms)
Server application: 1.5.21
Found product RM-680 rev. 0521
Server implements softupd protocol version 1.8
Battery level 95 %, continuing.
Erasing, this may take a while.
Erase done.
Success
C:\Documents and Settings\eskMaemo>flasher -F C:\Windows\EMMC.bin --erase-mmc=secur
e
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Ping attempt 1 (250 ms)
Server application: 1.5.21
Found product RM-680 rev. 0521
Server implements softupd protocol version 1.8
Battery level 95 %, continuing.
Erasing, this may take a while.
Erase done.
Success
C:\Documents and Settings\eskMaemo>flasher -F C:\Windows\img.bin -F C:\Windows\emmc
.bin -f
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Ping attempt 1 (250 ms)
Server application: 1.5.21
Found product RM-680 rev. 0521
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_3.2012.02-6_PR_RM680
Image cert-sw not present for this HW (RM-680 rev. 0521)
Image xloader not present for this HW (RM-680 rev. 0521)
Image secondary not present for this HW (RM-680 rev. 0521)
Image moslo not present
Image tar skipped
Image config skipped
Battery level 95 %, continuing.
image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6008 / 6008 kB 2815 kB/s]
[x] kernel [finished 100 % 2714 / 2714 kB 2240 kB/s]
[x] rootfs [finished 100 % 758715 / 758715 kB 7110 kB/s]
[x] mmc [finished 100 % 172719 / 172719 kB 9928 kB/s]
Updating SW release
Success
C:\Documents and Settings\eskMaemo>flasher -F C:\Windows\img.bin --enable-rd-mode
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Ping attempt 1 (250 ms)
Server application: 1.5.21
Found product RM-680 rev. 0521
Server implements softupd protocol version 1.8
The device is now in R&D mode
Success
C:\Documents and Settings\eskMaemo>flasher -F C:\Windows\img.bin --reboot
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Ping attempt 1 (250 ms)
Server application: 1.5.21
Found product RM-680 rev. 0521
Server implements softupd protocol version 1.8
Success
Win_OCF_22-6_EMMC_RM680-OEM1-916 (RX-71.bin/CRC32: 70762231 + EMMC.bin/CRC32: 891AC7B6)
Win_OCF_02-6_RM680-RM680-OEM1.exe (img.bin/CRC32: A3AD6F6A + emmc.bin/CRC32/9917B32A)
2nieldk, Thx, I found 'em in first day I start reflashing this N950. This FW uploaded by one one the Developer.Nokia Moderators.
But after all this work smartphone don't boot properly. It's flashs ok (blue stripe confirms that both images downloaded to unit), but after booting unit loads to Nokia logo, and starts reboot all over again (this way if R&D Mode OFF).
After I turn R&D mode ON unit shows me that (also loop reboot time by time), so... better than nothing, in any case, it's now clear that the machine is alive and flashable. (Btw, yep, display was little struck in 2 places when I got this unit, but digitizer is fully working.)
So, any more ideas to fix this Zombie?
P.S> 2nieldk, My N950 is same that this item, but has more early HW: http://www.ebay.co.uk/itm/Nokia-N950...-/161071242998
Here is some seller's info he gave:
"This device has HW build 0829, it should be build F1 if I remember correctly. I don't need to mod HW , I can flash PR1.3 directly." So, looks I said right above, and my N950 is most early build (and rare lol) from all N950 protos that exist here and in eBay at the moment.
Last edited by DirkDagger; 2013-07-30 at 23:50.
|
|
2013-07-31
, 01:05
|
|
Posts: 1,225 |
Thanked: 1,905 times |
Joined on Feb 2011
@ Quezon City, Philippines
|
#10
|
Yep, that happens when your device does ~17 watchdog timeouts.
Try loading ubiboot (flasher -l) to get a telnet console to the device before Harmattan starts up, clear /var/malf, and start figuring out what needs to be done.
Try loading ubiboot (flasher -l) to get a telnet console to the device before Harmattan starts up, clear /var/malf, and start figuring out what needs to be done.
__________________
N9 PR 1.3 Open Mode + kernel-plus for Harmattan
@kenweknot, working on Glacier for Nemo.
N9 PR 1.3 Open Mode + kernel-plus for Harmattan
@kenweknot, working on Glacier for Nemo.
Trying to reflash it with various versions of OCF, but it writes errors without any result.