Active Topics
-
Porting apps to Leste (29)
to Maemo 7 / Leste by Arno_11 - 2 days, 13 hrs ago -
Install Fonts in N900 (68)
to Maemo 5 / Fremantle by teroyk - 3 days, 16 hrs ago - more...
| The Following User Says Thank You to freemangordon For This Useful Post: | ||
 |
|
2011-11-13
, 20:34
|
|
Posts: 168 |
Thanked: 206 times |
Joined on Apr 2010
@ Finland
|
#2012
|
Originally Posted by patlak
Therefore I use this profile only during night time (doesn't matter if it is lagging). Day time I have 500M and 850M profile.
How's the lag when using the device at 125 min? At 250 I notice a huge lag compared to 500 min when entering the app menu. I know that it's lighter on the battery, but it's annoying
EDIT:
Night time: 125:12,90 500:30,360 (w/o SR)
Day time: 500:30,360 850:49,600 (w SR)
Last edited by Gusse; 2011-11-14 at 04:47.
|
|
2011-11-13
, 20:35
|
|
Posts: 159 |
Thanked: 68 times |
Joined on Sep 2011
@ India
|
#2013
|
Originally Posted by freemangordon
Yep, (unable to play media format unsupported) message pops up at both the frequencies i.e 720M & 805M..
So you have message " ...unsupported" on both 720 and 805? Or it stutters? What are your DSP speeds for 720 and 805? Are you using "stock" DSP profile?
dsp rates..
720=520
805=600
And yes i am using stock dsp profile without any modifications...
i have a custom profile very similar to dsp profile but with reduced voltages and vdd1=0
it has..
500=48 360
550=48 400
600=50 430
720=50 520
805=52 600
850=52 600
900=54 600
vdd1=0 vdd2=1
sampling rate=300000
upthreshold factor=95
ign nice load = 0
power saver bias=0
this plays all videos smoothly..
IMHO i think vdd1 is the confounding factor
and yes it hd 1280x720 xvid
Last edited by knobby; 2011-11-13 at 20:38.
|
|
2011-11-13
, 20:51
|
|
Posts: 3,074 |
Thanked: 12,960 times |
Joined on Mar 2010
@ Sofia,Bulgaria
|
#2014
|
@knobby: The problem is that your DSP cannot handle much overclocking.
Ok, could you please make a custom profile based on dsp, make maximum frequency to be 900 and change DSP frequencies as follows (leaving SR enabled):
720 - 430
805 - 500
850 - 560
900 - 600
and try again.
Ok, could you please make a custom profile based on dsp, make maximum frequency to be 900 and change DSP frequencies as follows (leaving SR enabled):
720 - 430
805 - 500
850 - 560
900 - 600
and try again.
| The Following 4 Users Say Thank You to freemangordon For This Useful Post: | ||
|
|
2011-11-13
, 21:14
|
|
Posts: 1,033 |
Thanked: 1,013 times |
Joined on Jan 2010
|
#2015
|
@freemangordon
If it's of any assistance, I was just testing my voltage limits.
500/360=28 fully stable, 27 gave a reboot, but I keep mine at 29
550,600/520=39 fully stable, 38 gave playback error, no reboot though; i keep it at 40
I'll be testing 250 and 125 and let you know how it'll fare
EDIT: SR is disabled
@Gusse
What are your nightime min max?
Last edited by patlak; 2011-11-13 at 21:19.
If it's of any assistance, I was just testing my voltage limits.
500/360=28 fully stable, 27 gave a reboot, but I keep mine at 29
550,600/520=39 fully stable, 38 gave playback error, no reboot though; i keep it at 40
I'll be testing 250 and 125 and let you know how it'll fare
EDIT: SR is disabled
@Gusse
What are your nightime min max?
Last edited by patlak; 2011-11-13 at 21:19.
| The Following 2 Users Say Thank You to patlak For This Useful Post: | ||
|
|
2011-11-13
, 21:23
|
|
Posts: 159 |
Thanked: 68 times |
Joined on Sep 2011
@ India
|
#2016
|
Originally Posted by freemangordon
i tried the above stated parameters and the results are
@knobby: The problem is that your DSP cannot handle much overclocking.
Ok, could you please make a custom profile based on dsp, make maximum frequency to be 900 and change DSP frequencies as follows (leaving SR enabled):
720 - 430
805 - 500
850 - 560
900 - 600
and try again.
I WANNA GIVE U A TIGHT HUG FREEMANGORDON....
video played flawlessly at 850 and 900 though stuttered at 720 and 805...
awesomely awesome playback at 850 and 900...no irritating messages and not a single framedrop...
thanks a lot...
| The Following 3 Users Say Thank You to knobby For This Useful Post: | ||
 |
|
2011-11-13
, 21:29
|
|
Posts: 855 |
Thanked: 612 times |
Joined on Oct 2010
@ Germany
|
#2017
|
Here running at 125:10,90
will report tomorrow, leave it this way for a night with a charger plugged in.
EDIT
usually running at this
Last edited by Alfred; 2011-11-13 at 21:31.
will report tomorrow, leave it this way for a night with a charger plugged in.
EDIT
usually running at this
Code:
current kernel configuration: current frequency: 805 supported frequencies: 125 250 500 550 600 720 805 850 900 950 1000 1100 1150 min. frequency: 720 max. frequency: 805 avoid frequencies: 125 250 500 550 600 950 1000 1100 1150 active frequencies: 720:45,430 805:47,500 850:50,560 900:52,600 SmartReflex VDD1=1, VDD2=1 governor ondemand: ignore nice load= 1, up threshold= 95, sampling rate= 300000, powersave bias= 20
__________________
Reps are just one click away: Extras | Extras-Testing | Extras-Devel | My-Maemo | CSSU |
Transform your lock screen into a weather forecast Thanks button ================>
Reps are just one click away: Extras | Extras-Testing | Extras-Devel | My-Maemo | CSSU |
Transform your lock screen into a weather forecast Thanks button ================>
Last edited by Alfred; 2011-11-13 at 21:31.
 |
|
2011-11-13
, 21:33
|
|
Posts: 5,028 |
Thanked: 8,613 times |
Joined on Mar 2011
|
#2018
|
Originally Posted by knobby
Same here, but I would also like to give You a big hug, for all those testing - You did it before I was even able to install new kernel, and I'm sure it's very helpful for freemangordon.
I WANNA GIVE U A TIGHT HUG FREEMANGORDON....
/Estel
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
| The Following User Says Thank You to Estel For This Useful Post: | ||
|
|
2011-11-13
, 22:02
|
|
Posts: 3,074 |
Thanked: 12,960 times |
Joined on Mar 2010
@ Sofia,Bulgaria
|
#2019
|
Originally Posted by patlak
Thanks, but could you also enable SR to check what voltages it calculates.
@freemangordon
If it's of any assistance, I was just testing my voltage limits.
500/360=28 fully stable, 27 gave a reboot, but I keep mine at 29
550,600/520=39 fully stable, 38 gave playback error, no reboot though; i keep it at 40
I'll be testing 250 and 125 and let you know how it'll fare
EDIT: SR is disabled
@Gusse
What are your nightime min max?
|
|
2011-11-13
, 22:08
|
|
Posts: 1,163 |
Thanked: 1,873 times |
Joined on Feb 2011
@ The Netherlands
|
#2020
|
Originally Posted by freemangordon
How to check what voltages it calculates? I just use SR to 900MHz with slightly lower voltages than the dsp profile. Do you want me to put it to its limits?
Thanks, but could you also enable SR to check what voltages it calculates.
 |
| Tags |
| battery-status, bq27x00_battery, kernel, kernel-power, misiak4king, noobs-cant-read, pali4president, patches, readdirections, revolverspinyou |
«
Previous Thread
|
Next Thread
»
|
All times are GMT. The time now is 09:15.
EDIT:
Is it HD video you are trying to play?